- 52 -
Setting page length by line/ ESC C
[ASCII]
ESC
C
n
[Decimal]
27 67 n
[Hexadecimal] 1B 43 n
[Parameter] 1
≤
n
≤
127
[Description]
●
Sets the page length by n lines.
●
Page length is set as an absolute length of (Line feed rate) × (Number of lines). Once this command is set, even when
the line feed rate is changed, the page length does not change. When the line feed rate is set to 0, this code is ignored.
●
The paper position at the time of execution of the command becomes the head of line.
●
Cancels the perforated line skip (bottom margin) setting by ESC N.
●
Default is set to approx. 8 inch. (A4 paper size).
Setting page length by inch unit/ESC C NUL
[ASCII]
ESC
C
NUL
n
[Decimal]
27 67 0 n
[Hexadecimal]
1B 43 00 n
[Parameter] 1
≤
n
≤
15
[Description]
●
Paper position at the time of execution of the command becomes the head of line.
●
Page length is set as an absolute length. Therefore, once this command is set, even when the line feed rate is changed,
the page length does not change.
●
Cancels the perforated line skip (bottom margin) setting by ESC N.
●
Default is set to approx. 8 inch. (A4 paper size).
●
While page length is set to ‘n’ inch, due to the difference in vertical top of form between EPSON and PD22, 1 inch is
calculated as approximately 180/203 for PD22. In such case, differences will occur between EPSON and PD22 as
follows.
Unit: inch
EPSON
PD22
1 180/180
180/203
・
・
・
5 900/180
900/203
・
・
・
10 1800/180
1800/203
・
・
・
15 2700/180
2700/203
