8
Setting power OFF time/ESC
~
O
[ASCII]
ESC
~
O
n
[Decimal]
27 126 79 n
[Hexadecimal] 1B 7E 4F n
[Parameter]
n=0, 1, 3, 5, 10, 15 (the setting is available for binary only)
[Description]
●
Specifies the auto power OFF time. If no data is received or operated during a set period of time after the last receive of
data or the last operation of the FEED button, the printer power will be automatically turned off.
●
For the setting, 1 to 15 minutes can be set. If you wish to set Power OFF setting as invalid, set the time to 0
minute.
●
Default setting is the time set as low power time in the internal setting of the printer.
●
The set values are stored and kept in the flash memory.
●
Do not use this command together with other print commands because it writes data into the flash memory.
●
After data are stored in the flash memory, the printer power is automatically turned OFF. The set values
become effective when the power is turned ON again.
Setting value
Time
0
Power supply is not turned OFF
1 1
minute
3 3
minutes
5 5
minutes
10 10
minutes
15 15
minutes
●
The setting value other than above is ignored.
●
During a print wait state (ie. when unprinted data are remaining in the printer due to an error, etc.), the printer power will
not be automatically turned OFF.
