iDP3310 User's Manual
41
CITIZEN
RS
ALL
[Function]
Set Double-Width Character
[Code]
<1E>H
[Outline]
This command prints its subsequent characters in double width. If a line has a position only
for one character, it will be printed in normal width.
This attribute remains valid until the US command(normal-width mode) or CAN command is
received.
In the P-200 mode, this attribute will be reset to the normal width at the beginning of each
line, every time the line is fed.
[See Also]
US, SO, SI
US
ALL
[Function]
Set Normal-Width Character
[Code]
<1F>H
[Outline]
This command resets the double-width character attribute and prints in normal width. The
print data received after this command are printed as normal-width characters.
[See Also]
RS, SO, SI
Summary of Contents for iDP-3310
