Citizen iDP-3310, User Manual

Page: 59 / 87

iDP3310 User's Manual
46 CITIZEN
ESC f (n) ;
ALL
[Function] Select Line Attribute
[Code] <1B>H<66H>(n)<3B>H
[Range] 0
≤
(n)
≤
3 (<30>H
≤
n
≤
<33>H)
[Outline] This command is used to select the attribute required to be applied to the entire line at one
time. In combination with the double-width command (SO, RS), it can print quadruple-width
characters.
n Function
0 Normal characters
1 Double-height characters
♦
n = 2 or 3 has not been defined.
[Caution] Be sure to add ";"(<3B>H) to the end of the parameter.
[Default] n = 0
[See Also] SO, SI, RS, US
ESC h (n) ;
ALL
[Function] Select Character Set
[Code] <1B>H<68H>(n)<3B>H
[Range] 0
≤
(n)
≤
10 (<30>H
≤
n
≤
<39>H)
[Outline] This command selects the character sets of the countries listed below, depending on the n-
value.
[Caution] Be sure to add ";"(<3B>H) to the end of the parameter. As shown separately, the character
sets replace part of characters. If the n-value is specified beyond the limits, this command
will be ignored.
[Default] n = 0
[See Also] 11.3 International Character Codes Table
[Sample Program] When setting the character sets to Japan
ESC h 8 ;
→
LPRINT CHR$(&H1B)+"h8;" ;
<1B>H<68>H<38>H<3B>H
n Function
0 U.S.A.
1 France
2 Germany
3 U.K.
4 Denmark I
5 Sweden
n Function
6 Italy
7 Spain
8 Japan
9 Norway
10 Denmark II