Citizen iDP-3310, User Manual

Page: 31 / 87

iDP3310 User's Manual
18 CITIZEN
5. DIP SWITCH SETTING
5.1 Location of DIP Switch
The DIP switches are located under the bottom of the main body. If the power is turned on, their setting cannot
be valid. Turn on the power after setting the switches.
(1) Turn off the power.
(2) Unscrew the Dip switch cover. (Do not lose the screw)
(3) Slide the cover toward the screw mounting side, and remove it in the arrow-indicated direction.
(4) Set the DIP switches.
(5) After setting the switches, put back the cover and screw it.
CAUTION :
•
Watch out for the edges of the DIP switch cover. The screw used is M2 x 3mm.
Never use any other screw. (If lost, use its equivalent. Do not use a longer one.)
•
Be sure to turn off the power prior to setting the DIP switches. If it is set with the
power turned on, it may damage the printer.
•
Do not use something sharp to set the DIP switches. Be sure to leave the disabled
switch segments to OFF. (setting upon shipment)
* Do not use the printer with the DIP switch cover removed.