IP Dual Port PBXgateway and Remote System Administrator’s Guide
22
Using the Management Console
The Welcome screen is displayed automatically when you connect to the PBXgateway
and Remote using a serial cable. You must make sure that your terminal window is sized
so that you can see the border of
#
symbols around the contents.
Press any key to enter the console menu system. Menu options are selected using the PC
cursor keys: use the up and down keys to move within a menu or list of options, use the
left and right keys to return to a higher level menu or to access sub-menus (as described
in the
Command Keys
section on the next page).
The Console Interface
A typical screen from the console interface is shown in
Figure 4
below.
Figure 4: The Console Interface
1.
Menu Location
- Your current location within the menu system – in the example, you
are in the Configuration menu on the PBXgateway.
2.
Unit Name
- Typically used to identify the unit by its location (user configurable).
3.
Software Version
- The version of software currently installed.
4.
Menu List
- The options available within the current menu. The asterisk indicates
your current location (“Port” is highlighted in
Figure 4
, for example).
5.
Data Entry Window
- The area of the screen where configuration details are entered.
In this example, this is the Port configuration menu.
6.
Feature Information
- A short description and/or brief instructions on the current
menu item.
7.
Log
- An area that displays the four most recent lines from the log. Primarily used for
trouble shooting. A customer support representative will instruct the Administrator on
the use of this feature should the need arise.
8.
System Status
- Power indication message.
9.
Port Status
– Provides live information on the status of the individual ports.
Document Number: M-4100-MUC
Version: Rev AA
© Copyright 2007 Citel plc All Rights Reserved
