Citadel TouchStar TS3000, User Manual

Page: 9 / 44

8
TS3000/TS4000 TouchStar Systems User Manual
supplied as 4MB, 8MB, 12MB or 16MB of dynamic RAM
(DRAM). The specific memory configuration is determined
at the time the system is ordered.
• System Software
A 256Kx8 flash device contains the System BIOS, the Video
BIOS, and a Setup Utility.
• Network Interface Card and Software
The TouchStar is factory-configured with a Local Area
Network Interface Card (NIC) which is installed in the
system expansion slot. The specific NIC is determined by
the type of network to be used, i.e. hard-wired or wireless.
Each NIC has a unique hardware address and interrupt and
DMA channel assignments, but no logical unit designation.
The NIC allows the TouchStar to be configured for a variety
of network environments.
The TouchStar is factory-configured with network protocol
layers that are specific to the operating system or NIC. For
the TouchStar to communicate with the network it requires
the installation of a network driver (IPX). Both ODI and
NDIS drivers support standard LAN operating systems.
Accessories
• TS3000
Hard-wired configurations of the TS3000 are supplied
with a wall-mounted 110VAC power supply, this manual,
and Touchscreen-based programming references. Wireless
configurations also include an antenna. The mounting
bracket for the TS3000 is optional.
1 - INTRODUCTION