Citadel TouchStar TS3000, User Manual

Page: 21 / 44

20
TS3000/TS4000 TouchStar Systems User Manual
REBOOT
If the system freezes or locks up during normal operation, the
system can be reset by performing a reboot. The type of reboot
will depend upon the desired state of the TouchStar system.
Perform a warm boot when you
• need to clear the system’s memory to run another
program,
• do not want the computer to perform a self-test.
You must have a keyboard or keyboard emulator previously
attached to the system to perform a warm boot.
Perform a cold boot when the screen is frozen, or the system is
otherwise locked up. The cold boot is essentially a power-up
sequence.
Warm Boot
To perform a warm boot:
1. Press CTRL-ALT-DEL on the keyboard or keyboard
emulator on the touchscreen. This causes the system to
reprocess the config.sys and autoexec.bat files.
2. Reload the desired software application, if necessary.
Cold Boot
To perform a cold boot:
1. Remove power from the TouchStar by removing the
power supply from the wall outlet (TS3000), or turning
off the power ON/OFF switch on the DC power con-
verter (TS4000).
2. Turn the power back on by plugging the power supply
back into the wall outlet (TS3000) or turning on the
power ON/OFF switch on the DC power converter
(TS4000).
OR,
3. Push the RESET button on the rear panel of either unit.
3 - BASIC OPERATION