Citadel TouchStar TS3000, User Manual

Page: 18 / 44

17
TS3000/TS4000 TouchStar Systems User Manual
Keyboard Port
The keyboard connector is a IBM PS/2 standard, 6-pin mini-
DIN connector. This connector accepts an optional traditional
ASCII keyboard. Wedge-type barcode scanners should be
connected to this port; the (optional) keyboard should then be
plugged into the barcode scanner.
Figure 10. Keyboard DIN Connector Pinout
Pin Signal
1 Keyboard data
2 No connection
3 Ground
4 +5V
5 Keyboard clock
6 No connection
Table 5. Keyboard 6-pin DIN Connector Pinout
PCMCIA Slots
The TouchStar is supplied with dual PCMCIA slots which
provide an interface for portable memory cards, miniature disk
drives, modems, fax/modem cards, and network connections.
The TouchStar system software is provided with the appropriate
PCMCIA drivers which work with all operating systems sup-
ported by the TouchStar. The TouchStar’s two PCMCIA slots
each contain a standard 68-pin PCMCIA connector, and can
accept both Type II (add-on devices such as Flash Cards,
modems and network adapters) and Type III (miniature disk
drive interface) cards. PCMCIA Type I (SRAM) cards are also
supported. Memory and storage cards will typically appear on
the system as drive D:\ or E:\.
INSTALLATION & MAINTENANCE - 2