Cissell FMCD, Owner'S Manual

Page: 36 / 40

Page 36 Page 36
Page 36 Page 36 Page 36
CISSELL CISSELL
CISSELL CISSELL CISSELL APP
APP
APP APP APPAREL MANUFACTURERS FORMS
AREL MANUFACTURERS FORMS
AREL MANUFACTURERS FORMS AREL MANUFACTURERS FORMS AREL MANUFACTURERS FORMS
MODEL FM** MODEL FM**
MODEL FM** MODEL FM** MODEL FM**
SERVICE CHART SERVICE CHART
SERVICE CHART SERVICE CHART
SERVICE CHART
CA CA
CA CA CAUSE
USE
USE USE USE
1A Steam Supply Valve “OFF”
1B Loose wiring
1C Incorrect voltage of electrical
parts
1D Defective steam solenoid
1E Defective solenoid linkage
1F Defective start button switch
2A No electric power
2B Loose wiring
2C Incorrect voltage
2D Defective motor
3A Defective start button switch
3B Loose wiring
REMEDY REMEDY
REMEDY REMEDY REMEDY
Open valve in steam supply line.
Inspect wiring, especially to steam
solenoid. Replace any loose wires
and tighten all connections.
Inspect nameplate voltage and
voltage on electrical parts,
especially the steam solenoid.
Replace if necessary.
Inspect the steam solenoid.
Replace if it is burned, armature
does not move freely, or if it will
not operate on rated voltage.
Inspect linkage between solenoid
and steam valve. Adjust according
to instructions. Repair or replace
any defective parts. Tighten all
lock nuts and set screws.
Inspect start button switch to see
that it operates properly and will
carry current. If not repair or
replace.
Check electrical service for blown
fuses and loose connections. Turn
main disconnect “ON”. Turn main
switch “ON”.
Inspect wiring, especially to motor
and inside the motor junction box.
Replace any loose wires and
tighten all connections.
Check power source, machine
nameplate voltage and motor
nameplate voltage. All three must
be the same. If not, correct by
replacing parts as required.
Check motor to see if it will
operate on normal nameplate
electrical power. If not, replace the
motor.
Inspect start button switch to see
that it operates properly and will
carry current. If not, repair or
replace.
Inspect wiring, especially to the
start button switch. Replace any
loose wires and tighten all
connections.
PROBLEM PROBLEM
PROBLEM PROBLEM PROBLEM
(1) No Steam
(2) Motor won’t start
(3) Motor will run, machine won’t
start auto cycle