Trouble Shooting Cont.
Head Will Not Stop In 60 Degree Position:
1.) Defective Head Position Reed Switch #2 (L2) or Out Of Adjustment.
2.) Defective Head Position Switch (Electrical)
3.) Relay #8 Defective or Loose.
Head Will Not Stop At 110 Degree Postion:
1.) Defective Head Position Reed Switch #3 (L3) or Out Of Adjustment.
2.) Defective Head Position Switch (Electrical)
3.) Relay #8 Defective or Loose.
No Head Steam Manual Position:
1.) Adjusting Screw Is Not Activating Plunger On Rear Of Steam Valve.
Head Steam Leaking:
1.) Debris On Seat In Head Steam Valve.
2.) Spring In Head Valve Broken or Weak.
No Buck Stem:
1.) Buck Steam Valve Out Of Adjustment.
2.) Buck Steam Foot Switch Not Working or Defective.
3.) Buck Steam Air Valve #1 Defective.
4.) Air Line From Air Valve #1 To Air Cylinder #18 Kinked.
Buck Steam Leaking:
1.) Buck Steam Valve Seat Dirty or Defective.
2.) Spring In Buck Valve Broken or Weak.
3.) Buck Steam Solenoid #1 Leaking Through Holding The Valve Open.
4.) Buck Steam Foot Switch Stuck Closed Holding Valve Open.
No Vacuum Switch Manual:
1.) Vacuum Foot Switch Not Activited or Defective.
2.) Vacuum Air Valve #2 Defective.
3.) Vacuum Air Cylinder #19 defective.
4.) Kinked Air Line From Air Valve #2 To Air Cylinder #19.
Vacuum All The Time:
1.) Vacuum Valve Leaking or Stuck Open.
Buck Padding Getting Wet:
1.) Steam Pressure Too Low.
2.) Steam Trap Not Working.
3.) Leaking Vacuum Valve.
Head Steam Too Wet:
1.) Steam Pressure Too Low.
2.) Steam Trap Not Working.
Page 7
Summary of Contents for AOLAUKMAN592
Page 6: ...Page 5...
