Cisco WAVE-574-K9 - Wide Area Virtualization Engine 574, Hardware Installation Manual

Page: 92 / 112

Chapter 6 Troubleshooting the System Hardware
Power-On Self Test (POST)
6-22
Cisco Wide Area Virtualization Engine 574 Hardware Installation Guide
OL-17738-01
Step 2
Be sure no keys are depressed or stuck.
Step 3
If the failure reoccurs, replace the keyboard.
301-Keyboard Error or Test Fixture Installed
Possible Cause: Keyboard failure occurred.
Action: To correct this failure, follow these steps:
Step 1
Power down the WAVE appliance, and then reconnect the keyboard.
Step 2
Be sure no keys are depressed or stuck.
Step 3
If the failure reoccurs, replace the keyboard.
303-Keyboard Controller Error
Possible Cause: System board, keyboard, or mouse controller failure occurred.
Action: To correct this failure, follow these steps:
Step 1 Be sure the keyboard and mouse are connected.
Caution
Only authorized technicians should attempt to remove the system board. If you
believe the system board requires replacement, contact your support
representative before proceeding.
Step 2
2. If the problem persists, contact the Cisco Technical Assistance Center.
304-Keyboard or System Unit Error
Possible Cause: Keyboard, keyboard cable, mouse controller, or system board
failure.
Action: To correct this failure, follow these steps: