Cisco WAVE-574-K9 - Wide Area Virtualization Engine 574, Hardware Installation Manual

Page: 84 / 112

Chapter 6 Troubleshooting the System Hardware
Power-On Self Test (POST)
6-14
Cisco Wide Area Virtualization Engine 574 Hardware Installation Guide
OL-17738-01
POST Error Codes
The error messages and codes in this section include all messages generated by
the WAVE appliance. Some messages are informational only and do not indicate
any error. A WAVE appliance generates only the codes that are applicable to its
configuration and options.
Caution
Customer-replaceable components include the WAVE inline network adapter,
system memory, and hard disk drives. All other components that are not orderable
as spare hardware options can only be replaced by a qualified service technician.
Once you have identified a faulty component, contact the Cisco Technical
Assistance Center (TAC).
Advanced Memory Protection mode: Advanced ECC
Possible Cause: Advanced ECC support is enabled.
Action: None.
Advanced Memory Protection mode: Advanced ECC with hot-add support
Possible Cause: Advanced ECC with Hot-Add support is enabled.
Action: None.
Advanced Memory Protection mode: Online spare with Advanced ECC
...Xxxx MB System memory and xxxx MB memory reserved for Online Spare.
Possible Cause: This message indicates Online Spare Memory is enabled and
indicates the amount of memory reserved for this feature.
Action: None.
Advanced Memory Protection mode: Multi-board mirrored memory with Advanced ECC
...Xxxx MB System memory and xxxx MB memory reserved for Mirroring.
Possible Cause: This message indicates Mirrored Memory is enabled and
indicates the amount of memory reserved for this feature.
Action: None.