manualshive.com logo in svg

Cisco WAP571, Administration Manual

The Cisco WAP571 is a high-performance access point designed to provide reliable and fast wireless connectivity. To help you get started quickly, we offer a comprehensive Quick Start Manual that you can easily download for free from manualshive.com. This manual will guide you through the setup and configuration process effortlessly.

Share
Download
background image

Wireless

Networks

Cisco WAP571/E Administration Guide

94

5

lowercase alphabetic letters, numbers, and special characters) are used 
and how long the string is. If the WPA-PSK complexity check feature is 
enabled, the key is not accepted unless it meets the minimum criteria. See 

WPA-PSK Complexity

 for information on configuring the complexity check.

•

Broadcast Key Refresh Rate

—The interval at which the broadcast (group) 

key is refreshed for clients associated with this VAP. 

The default is 300 seconds. The valid range is from 0 to 86400 seconds. A 
value of 0 indicates that the broadcast key is not refreshed. 

WPA Enterprise

WPA Enterprise with RADIUS is an implementation of the Wi-Fi Alliance IEEE 
802.11i standard, which includes CCMP (AES), and TKIP encryption. The 
Enterprise mode requires the use of a RADIUS server to authenticate users.

This security mode is backwards-compatible with wireless clients that support 
the original WPA.

These parameters configure WPA Enterprise:

•

WPA Versions

—The types of client stations to be supported:

-

WPA-TKIP

—The network has some client stations that only support 

original WPA and TKIP security protocol. Note that selecting only WPA-
TKIP for the access point is not allowed as per the latest WiFi Alliance 
requirement.

-

WPA2-AES

—All client stations on the network support WPA2 version 

and AES-CCMP cipher/ security protocol. This WPA version provides 
the best security per the IEEE 802.11i standard. As per the latest WiFi 
Alliance requirement, the AP has to support this mode all the time.

•

MFP (Management Frame Protection) 

—Provides security for the 

otherwise unprotected and unencrypted 802.11 management frames. This 
field is visible only when WPA2 security and CCMP fields are enabled. The 
following three check box values can be configured for it. The default is 
Capable.

-

Not Required

-

Capable

-

Required

•

Enable pre-authentication

—If for WPA Versions you select only WPA2 or 

both WPA and WPA2, you can enable pre-authentication for WPA2 clients.

Summary of Contents for WAP571

































































































































































































Reviews:

No comments

Related manuals for WAP571

D-Link DWL-7130AP - xStack - Wireless Access Point Overview preview
DWL-7130AP - xStack - Wireless Access Point
Brand: D-Link Pages: 4
Ebyte E70-900M14S1B Manual preview
E70-900M14S1B
Brand: Ebyte Pages: 14
Zenitel ECP-C1 Installation And User Manual preview
ECP-C1
Brand: Zenitel Pages: 29
NETGEAR WG602v3 - Wireless Access Point Reference Manual preview
WG602v3 - Wireless Access Point
Brand: NETGEAR Pages: 122
EnGenius 11b/g Wireless Outdoor Multi-Client Bridge/AP User Manual preview
11b/g Wireless Outdoor Multi-Client Bridge/AP
Brand: EnGenius Pages: 53
Ericsson HBS2 Quick Installation Manual preview
HBS2
Brand: Ericsson Pages: 8
Vaisala VaiNet AP10 Manual preview
VaiNet AP10
Brand: Vaisala Pages: 76
WoMaster WA512G Series User Manual preview
WA512G Series
Brand: WoMaster Pages: 115
Cellient MHN200 User Manual preview
MHN200
Brand: Cellient Pages: 23
Zte Unite User Manual preview
Unite
Brand: Zte Pages: 29
Pepwave AP One AC mini User Manual preview
AP One AC mini
Brand: Pepwave Pages: 58
Pepwave AP One User Manual preview
AP One
Brand: Pepwave Pages: 76
Comcast MiFi 2200 Device User Manual preview
MiFi 2200
Brand: Comcast Pages: 16
4IPNET EAP701 Quick Installation Manual preview
EAP701
Brand: 4IPNET Pages: 17
Draytek VigorAP 900 User Manual preview
VigorAP 900
Brand: Draytek Pages: 207
TELEFONICA Wireless Router Installation Manual preview
Wireless Router
Brand: TELEFONICA Pages: 20
Telefonix PDT Cabin Ace-2 User Manual preview
Cabin Ace-2
Brand: Telefonix PDT Pages: 48
Xiaomi Mi Wi Fi Router 2 Quick Setup preview
Mi Wi Fi Router 2
Brand: Xiaomi Pages: 4

Brands by name

Popular brands

Load more brands