Cisco WAP571, Administration Manual

Page: 37 / 192

Administration
Time Settings
Cisco WAP571/E Administration Guide 37
3
STEP 1
For the System Clock Source field, select Network Time Protocol (NTP) .
STEP 2
Configure these parameters:
• NTP Server/IPv4/IPv6 Address Name —Specify the IPv4 address, IPv6
address, or hostname of an NTP server. A default NTP server is listed.
A hostname can consist of one or more labels, which are sets of up to 63
alphanumeric characters. If a hostname includes multiple labels, each is
separated by a period (.). The entire series of labels and periods can be up
to 253 characters long.
• Time Zone— Select the time zone for your location.
STEP 3
Select Adjust Time for Daylight Savings if daylight savings time is applicable to
your time zone. When selected, configure these fields:
• Daylight Savings Start —Select the week, day, month, and time when
daylight savings time starts.
• Daylight Savings End —Select the week, day, month, and time when
daylight savings time ends.
• Daylight Savings Offset— Specify the number of minutes to move the clock
forward when daylight savings time begins and backward when it ends.
STEP 4
Click Save . The changes are saved to the Startup Configuration.
To manually configure the time settings:
STEP 1
For the System Clock Source field, select Manually .
STEP 2
Configure these parameters:
• System Date —Select the current month, day, and year date from the drop-
down lists.
• System Time —Select the current hour and minutes in 24-hour clock format,
such as 22:00:00 for 10 p.m.
NOTE
There is an arrow next to System Time to set time from current computer if
you want to use the time and date of your computer.
• Time Zone —Select the time zone for your location.