Cisco WAP571, Administration Manual

Page: 149 / 192

SNMP
Groups
Cisco WAP571/E Administration Guide 149
10
To add and configure an SNMP view:
STEP 1
Select SNMP > Views in the navigation pane.
STEP 2
Click Add to create a new row in the SNMPv3 Views table.
STEP 3
Check the box in the new row and click Edit :
• View Name —Enter a name that identifies the MIB view. View names can
contain up to 32 alphanumeric characters.
• Type —Choose whether to include or exclude the view subtree or family of
subtrees from the MIB view.
• OID —Enter an OID string for the subtree to include or exclude from the view.
For example, the system subtree is specified by the OID string .3.6.1.2.1.1.
• Mask —Enter an OID mask. The mask is 47 characters in length. The format
of the OID mask is xx.xx.xx (.)... or xx:xx:xx.... (:) and is 16 octets in length. Each
octet is two hexadecimal characters separated by either a period (.) or a
colon (:). Only hex characters are accepted in this field.
For example, OID mask FA.80 is 11111010.10000000.
A family mask is used to define a family of view subtrees. The family mask
indicates which subidentifiers of the associated family OID string are
significant to the family's definition. A family of view subtrees enables
efficient control access to one row in a table.
STEP 4
Click Save . The view is added to the SNMPv3 Views list and your changes are
saved to the Startup Configuration.
NOTE
To remove a view, select the view in the list and click Delete .
Groups
SNMPv3 groups allow you to combine users into groups of different authorization
and access privileges. Each group is associated with one of three security levels:
• noAuthNoPriv