LAN
LLDP
Cisco WAP571/E Administration Guide
70
4
STEP 1
Select
LAN > LLDP
in the navigation area.
STEP 2
Configure the following parameters:
•
LLDP Mode
—
The
administrative
mode
of
LLDP
on
the
AP.
When
LLDP
is
enabled,
the
AP
transmits
LLDP
Protocol
Data
Units
to
neighbor
devices.
•
TX Interval
—
The
number
of
seconds
between
LLDP
message
transmissions.
The
valid range is 5 to 32768 seconds. The default value is 30 seconds.
•
POE Priority
—The priority level transmitted by the AP in the Extended
Power information element. The PoE priority level helps the Power Sourcing
Equipment (PSE), such as a switch, determine which powered devices
should be given priority in power allocation when the PSE does not have
enough capacity to supply power to all connected devices. The PoE priority
can be one of the following:
-
Critical
-
High
-
Low
-
Unknown
STEP 3
Click
Save
. The settings are saved to the system.
Summary of Contents for WAP571
