S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
2-18
Cisco UCS 6100 Series Fabric Interconnect Hardware Installation Guide
OL-20036-02
Chapter 2 Installing the Cisco UCS 6100 Series Fabric Interconnect
Grounding the Chassis
Grounding the Chassis
The chassis has a grounding pad with two threaded M4 holes for attaching a grounding lug.
Figure 2-10
shows how to ground the Cisco UCS 6120XP.
Figure 2-11
shows how to ground the Cisco UCS 6140XP.
Warning
When installing or replacing the unit, the ground connection must always be made first and
disconnected last.
Statement 1046
Caution
We recommend grounding the chassis, even if the rack is already grounded.
Caution
All power supplies must be grounded. The receptacles of the AC power cables used to provide power to
the chassis must be the grounding type, and the grounding conductors should connect to protective earth
ground at the service equipment.
Figure 2-10
Grounding the Cisco UCS 6120XP Fabric Interconnect
1
Grounding cable
2
Screws, M4, with square cone washers
3
NRTL listed grounding lug
4
Close-up of grounding pad on the chassis
192758
2
3
4
1
