D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
148
Cisco TelePresence System Codec C40/C60
API Reference Guide
Audio status
xStatus Audio
Shows the top level overview of the audio status. The identities of the LocalInput, RemoteInput,
LocalOutput and RemoteOutput are used when querying additional information.
xStatus Audio Microphones Mute
Shows the microphones mute mode.
Value space of the result returned:
<On/Off>
Example:
xStatus Audio Microphones Mute
*s Audio Microphones Mute: Off
** end
xStatus Audio Volume
Shows the volume level (dB) of the loudspeaker output.
Value space of the result returned:
<0..100>
Example:
xStatus Audio Volume
*s Audio Volume: 70
** end
xStatus Audio Input LocalInput [1..n] Name
Shows the name of the local input. A local input is a mix of input connectors. You can run the
command xStatus Audio Input LocalInput to find the identity [n] of the input.
Value space of the result returned:
<String>
Example:
xStatus Audio Input LocalInput 1 Name
*s Audio Input LocalInput 1 Name: "Microphone"
** end
xStatus Audio Input LocalInput [n] MixerMode
Shows how the local input connectors have been mixed together. You can run the command
xStatus Audio Input LocalInput to find the identity [n] of the input.
Auto: The microphone with the strongest speaker is active and the others are strongly attenuated.
Fixed: The input connector signals are mixed together with equal gains.
GainShared: The microphones are given a normalized gain factor relative to the strongest speaker
before being mixed together.
Value space of the result returned:
<"Auto"/"Fixed"/"GainShared">
Example:
xStatus Audio Input LocalInput 1 MixerMode
*s Audio Input LocalInput 1 MixerMode: "Auto"
** end
xStatus Audio Input LocalInput [n] Mute
Shows the mute mode for the local inputs. A local input is a mix of input connectors.
You can run the command xStatus Audio Input LocalInput to find the identity [n] of the input.
Value space of the result returned:
<"On"/"Off">
Example:
xStatus Audio Input LocalInput 1 Mute
*s Audio Input LocalInput 1 Mute: "Off"
** end
xStatus Audio Input LocalInput [n] Channels
States if the local input channels are mixed into into a mono signal (1) or stereo signal (2).
You can run the command xStatus Audio Input LocalInput to find the identity [n] of the input.
Value space of the result returned:
<1..2>
Example:
xStatus Audio Input LocalInput 1 Channels
*s Audio Input LocalInput 1 Channels: 1
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xStatus
