Home
/
Cisco
/
TelePresence System Codec C40
/
Reference Manual

Cisco TelePresence System Codec C40, Reference Manual

Share

Page: 204 / 224

Cisco TelePresence System Codec C40 Reference Manual Download Page 204

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.

Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.

204

Cisco TelePresence System Codec C40/C60

API Reference Guide

xStatus SystemUnit Notifications Notification [n] Type

Lists the system notification types. Notifications are issued e.g. when a system is rebooted because

of a software upgrade, or when a factory reset is performed.
FactoryResetOK: This value is returned after a successful factory reset.
FactoryResetFailed: This value is returned after a failed factory reset attempt.
SoftwareUpgradeOK: This value is returned after a successful software upgrade.
SoftwareUpgradeFailed: This value is returned after a failed software upgrade attempt.
RebootRequired: This value is returned when a reboot is required.
Other: This value is returned for any other notifications.
All the notifications can be removed from the list by issuing the xCommand SystemUnit Notifications

RemoveAll command.

Value space of the result returned:

<FactoryResetOK, FactoryResetFailed, SoftwareUpgradeOK, SoftwareUpgradeFailed,

RebootRequired, Other>

Example:

xStatus SystemUnit Notifications Notification 1 Type
*s SystemUnit Notifications Notification 1 Type: SoftwareUpgradeOK
** end

xStatus SystemUnit Notifications Notification [n] Text

Lists text related to important system notifications. Notifications are issued e.g. when a system was

rebooted because of a software upgrade, or when a factory reset has been performed.
All the notifications can be removed from the list by issuing the xCommand SystemUnit Notifications

RemoveAll command.

Value space of the result returned:

<String>

Example:

xStatus SystemUnit Notifications Notification 1 Text
*s SystemUnit Notifications Notification 1 Text: "OK"
** end

xStatus SystemUnit Diagnostics LastRun

Shows when the SystemUnit diagnostics was last run on the codec.

Value space of the result returned:

<String>

Example:

xStatus SystemUnit Diagnostics LastRun
*s SystemUnit Diagnostics LastRun: "2012-08-17, 16:23:27"
** end

xStatus SystemUnit Diagnostics Message Type

Returns information on the results of the latest diagnostics on the system.

Value space of the result returned:

<ValidAdminPassword/CamerasDetected/H320GatewayStatus/ISDNLinkCompatibility/

SIPProfileRegistration/SIPListenPortAndOutboundMode/TLSVerifyRequiredCerts/

DefaultCallProtocolRegistered/NetSpeedAutoNegotiated/HasValidReleaseKey/

EthernetDuplexMatches/IPv4Assignment/IPv6Assignment/SIPProfileType/

CallProtocolIPStackPlatformCompatability/CameraStatus/CameraPairing/

CameraSoftwareVersion/SelectedVideoInputSourceConnected/OSDVideoOutput/

VideoFromInternalCamera/H323GatekeeperStatus/SipIceAndAnatConflict/

UdpPortRangeViolation/ProvisioningStatus/CallProtocolVcsProvisioningCompatibility/

CallProtocolDualStackConfig>

Example:

xStatus SystemUnit Diagnostics Message type
*s SystemUnit Diagnostics Message 1 Type: InvalidAdminPassword
** end

Contents

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xStatus

«
...
202
203
204
205
206
...
»

Summary of Contents for TelePresence System Codec C40

































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands