D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
75
Cisco TelePresence System Codec C40/C60
API Reference Guide
xConfiguration Video Selfview
Determine if the main video source (self-view) shall be displayed on screen.
This setting is obsoleted by the Video SelfviewDefault Mode setting.
Requires user role:
USER
Value space:
<Off/On>
Off:
Do not display self-view on screen.
On:
Display self-view on screen.
Example:
xConfiguration Video Selfview: On
xConfiguration Video SelfviewPosition
Select where the small self-view PiP (Picture-in-Picture) will appear on screen.
This setting is obsoleted by the Video SelfviewDefault PIPPosition setting.
Requires user role:
ADMIN
Value space:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
UpperLeft:
The self-view PiP will appear in the upper left corner of the screen.
UpperCenter:
The self-view PiP will appear in the upper center of the screen.
UpperRight:
The self-view PiP will appear in the upper right corner of the screen.
CenterLeft:
The self-view PiP will appear on the left side of the screen, in center.
CenterRight:
The self-view PiP will appear on the right side of the screen, in center.
LowerLeft:
The self-view PiP will appear in the lower left corner of the screen.
LowerRight:
The self-view PiP will appear in the lower right corner of the screen.
Example:
xConfiguration Video SelfviewPosition: LowerRight
xConfiguration Video SelfviewDefault Mode
Determine if the main video source (self-view) shall be displayed on screen after a call. The position
and size of the self-view window is determined by the Video SelfviewDefault PIPPosition and the
Video SelfviewDefault FullscreenMode settings respectively.
Requires user role:
ADMIN
Value space:
<Off/Current/On>
Off:
self-view is switched off when leaving a call.
Current:
self-view is left as is, i.e. if it was on during the call, it remains on after the call; if it was off
during the call, it remains off after the call.
On:
self-view is switched on when leaving a call.
Example:
xConfiguration Video SelfviewDefault Mode: Current
xConfiguration Video SelfviewDefault FullscreenMode
Determine if the main video source (self-view) shall be shown in full screen or as a small picture-in-
picture (PiP) after a call. The setting only takes effect when self-view is switched on (see the Video
SelfviewDefault Mode setting).
Requires user role:
ADMIN
Value space:
<Off/Current/On>
Off:
self-view will be shown as a PiP.
Current:
The size of the self-view picture will be kept unchanged when leaving a call, i.e. if it was
a PiP during the call, it remains a PiP after the call; if it was fullscreen during the call, it remains
fullscreen after the call.
On:
The self-view picture will be shown in fullscreen.
Example:
xConfiguration Video SelfviewDefault FullscreenMode: Current
xConfiguration Video SelfviewDefault PIPPosition
Determine the position on screen of the small self-view picture-in-picture (PiP) after a call. The
setting only takes effect when self-view is switched on (see the Video SelfviewDefault Mode
setting) and fullscreen view is switched off (see the Video SelfviewDefault FullscreenMode setting).
Requires user role:
ADMIN
Value space:
<Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/
LowerRight >
Current:
The position of the self-view PiP will be kept unchanged when leaving a call.
UpperLeft:
The self-view PiP will appear in the upper left corner of the screen.
UpperCenter:
The self-view PiP will appear in the upper center position.
UpperRight:
The self-view PiP will appear in the upper right corner of the screen.
CenterLeft:
The self-view PiP will appear in the center left position.
CentreRight:
The self-view PiP will appear in the center right position.
LowerLeft:
The self-view PiP will appear in the lower left corner of the screen.
LowerRight:
The self-view PiP will appear in the lower right corner of the screen.
Example:
xConfiguration Video SelfviewDefault PIPPosition: Current
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration
