D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
90
Cisco TelePresence System Codec C40/C60
API Reference Guide
xCommand Audio LocalInput Update
Update the settings of the local input given by the input ID.
InputId: A unique identifier for the local input.
Name: Choose a name that describes the mix of input connectors.
MixerMode Auto: The microphone with the strongest speaker is active and the others are strongly
attenuated.
MixerMode Fixed: The input connector signals are mixed together with equal gains.
MixerMode GainShared: The microphones are given a normalized gain factor relative to the
strongest speaker before being mixed together.
AGC: Automatic Gain Control.
Mute: Mutes the mix of input connectors.
Channels: Set channels to 1 to mix the input connectors into a mono signal. To mix the input
connectors into a stereo signal, set channels to 2.
Requires user role:
ADMIN
Parameters:
InputId(r): <0..65534>
Name(r): <S: 0, 255>
MixerMode(r): <Auto/Fixed/GainShared>
AGC(r): <On/Off>
Mute(r): <On/Off>
Channels(r): <1..2>
Example:
xCommand Audio LocalInput Update InputId: 2 Name: "Microphone" MixerMode:
GainShared AGC: Off Mute: Off Channels: 1
OK
*r AudioInputGroupUpdateResult (status=OK):
** end
xCommand Audio LocalInput Remove
Remove the local input given by the input ID.
InputId: A unique identifier for the local input.
Requires user role:
ADMIN
Parameters:
InputId(r): <0..65534>
Example:
xCommand Audio LocalInput Remove InputID: 2
OK
*r AudioInputGroupRemoveResult (status=OK):
** end
xCommand Audio LocalInput AddConnector
Attach an input connector to the local input given by the input ID. A connector is defined by its type
and ID.
InputId: A unique identifier for the local input.
ConnectorType: Select the connector type.
ConnectorId: Select a connector.
Requires user role:
ADMIN
Parameters:
InputId(r): <0..65534>
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..8>
Example:
xCommand Audio LocalInput AddConnector InputId: 3 ConnectorType: Line
ConnectorId: 1
OK
*r AudioInputGroupAddConnectorResult (status=OK):
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand
