1-3
Cisco TelePresence System 3200
OL-14521-01
Chapter 1 Overview
Conventions and Terminology
Step 2
Install and connect the PDUs for the display and first row table assembly. See
Step 1
through
Step 3
in
Chapter 9, “Routing Power and Signal Cables”
to install the PDUs and
Step 4
in
Chapter 9, “Routing
Power and Signal Cables”
to connect the cables.
Step 3
Connect the projector to the projector mounting bracket and connect the projector and bracket to the
table assembly. See
Step 2
and
Step 3
in
Chapter 8, “Assembling the Remaining Cisco TelePresence
Elements”
to connect the projector to the table assembly and
Step 4
in
Chapter 9, “Routing Power and
Signal Cables”
to connect the cables.
Step 4
Place the Cisco Unified IP Phone on the first row table and connect the phone cable. See
Step 4
in
Chapter 9, “Routing Power and Signal Cables”
to connect the cable.
Step 5
Install the privacy panels for the first row table. See
Step 15
through
Step 18
in
Chapter 6, “Building the
First Row Table Assembly.”
Step 6
Install the speaker boards and speakers. See
Step 8
through
Step 10
in
Chapter 8, “Assembling the
Remaining Cisco TelePresence Elements.”
Step 7
Install the projector screen. Refer to the projector screen installation guide that is packaged with the
assembly.
Step 8
Connect the power cables for the codecs, lighting and table leg power connections by completing
Step 4
in
Chapter 9, “Routing Power and Signal Cables.”
Step 9
Connect the signal cables for the first row table by completing
Step 5
in
Chapter 9, “Routing Power and
Signal Cables.”
Step 10
Assemble the camera targets by completing
Step 15
in
Chapter 8, “Assembling the Remaining
Cisco TelePresence Elements.”
Step 11
Perform first-time setup using the instructions in
Chapter 10, “First-Time Setup.”
Conventions and Terminology
•
The directions
left
and
right
in this guide are synonymous with
participant’s left
and
participant’s
right
. They refer to the assembly as you face the Plasma displays.
•
Cable connections to the Codecs are labeled with a color-coded symbol system.
–
A single dot on a green background indicates a
center
element.
–
Two dots on a white background indicate a
left
element.
–
Three dots on a red background indicate a
right
element.
Figure 1-2
Cable Connection Labeling System
Tools and Equipment List
To assemble the Cisco TelePresence System 3200, you need the following tools and equipment:
Uncrating and Unpacking:
•
Claw hammer or small pry bar
157702
