D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015.
www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
108
Cisco TelePresence MX200 and MX300
Administrator Guide
Video PIP ActiveSpeaker DefaultValue Position
Determine the position on screen of the active speaker picture-in-picture (PiP). The setting only
takes effect when using a video layout where the active speaker is a PiP, i.e. the Overlay layout,
or possibly a Custom layout (see the Video Layout LocalLayoutFamily setting). The setting takes
effect from the next call onwards; if changed during a call, it will have no effect on the current
call.
Requires user role:
ADMIN
Value space:
<Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/
LowerRight>
Current:
The position of the active speaker PiP will be kept unchanged when leaving a call.
UpperLeft:
The active speaker PiP will appear in the upper left corner of the screen.
UpperCenter:
The active speaker PiP will appear in the upper center position.
UpperRight:
The active speaker PiP will appear in the upper right corner of the screen.
CenterLeft:
The active speaker PiP will appear in the center left position.
CentreRight:
The active speaker PiP will appear in the center right position.
LowerLeft:
The active speaker PiP will appear in the lower left corner of the screen.
LowerRight:
The active speaker PiP will appear in the lower right corner of the screen.
Example:
Video PIP ActiveSpeaker DefaultValue Position: Current
Video PIP Presentation DefaultValue Position
Determine the position on screen of the presentation picture-in-picture (PiP). The setting only
takes effect when the presentation is explicitly minimized to a PiP, for example using the Touch
controller. The setting takes effect from the next call onwards; if changed during a call, it will
have no effect on the current call.
Requires user role:
ADMIN
Value space:
<Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/
LowerRight>
Current:
The position of the presentation PiP will be kept unchanged when leaving a call.
UpperLeft:
The presentation PiP will appear in the upper left corner of the screen.
UpperCenter:
The presentation PiP will appear in the upper center position.
UpperRight:
The presentation PiP will appear in the upper right corner of the screen.
CenterLeft:
The presentation PiP will appear in the center left position.
CentreRight:
The presentation PiP will appear in the center right position.
LowerLeft:
The presentation PiP will appear in the lower left corner of the screen.
LowerRight:
The presentation PiP will appear in the lower right corner of the screen.
Example:
Video PIP Presentation DefaultValue Position: Current
Video Selfview
Determine if the main video source (self-view) shall be displayed on screen.
This setting is obsoleted by the Video SelfviewDefault Mode setting.
Requires user role:
USER
Value space:
<Off/On>
Off:
Do not display self-view on screen.
On:
Display self-view on screen.
Example:
Video Selfview: On
Video SelfviewDefault Mode
Determine if the main video source (self-view) shall be displayed on screen after a call.
The position and size of the self-view window is determined by the Video SelfviewDefault
PIPPosition and the Video SelfviewDefault FullscreenMode settings respectively.
Requires user role:
ADMIN
Value space:
<Off/Current/On>
Off:
self-view is switched off when leaving a call.
Current:
self-view is left as is, i.e. if it was on during the call, it remains on after the call; if it
was off during the call, it remains off after the call.
On:
self-view is switched on when leaving a call.
Example:
Video SelfviewDefault Mode: Current
Video SelfviewDefault FullscreenMode
Determine if the main video source (self-view) shall be shown in full screen or as a small
picture-in-picture (PiP) after a call. The setting only takes effect when self-view is switched on
(see the Video SelfviewDefault Mode setting).
Requires user role:
ADMIN
Value space:
<Off/Current/On>
Off:
self-view will be shown as a PiP.
Current:
The size of the self-view picture will be kept unchanged when leaving a call, i.e. if it
was a PiP during the call, it remains a PiP after the call; if it was fullscreen during the call, it
remains fullscreen after the call.
On:
The self-view picture will be shown in fullscreen.
Example:
Video SelfviewDefault FullscreenMode: Current
Contents
Introduction
System settings
Setting passwords
Appendices
Web interface
System settings
