Example:
Figure 12: Boot Prompt
Step 5
After you enter the network configuration parameters in Setup mode, the appliance automatically reboots and returns to
the shell prompt mode.
Step 6
Exit from the shell prompt mode. The appliance comes up.
Step 7
Continue with
Verify the Installation Process, on page 37
.
Create a Bootable USB Device to Install Cisco ISE
Use the Fedora LiveUSB Creator tool to create a bootable USB device from the Cisco ISE installation ISO
file.
Before You Begin
•
Download Fedora LiveUSB Creator for Windows or Linux to the local system from the following
location:
https://fedorahosted.org/liveusb-creator/
.
Other USB tools might work, but Cisco recommends using Fedora LiveUSB Creator
as it has been qualified.
Note
•
Download the Cisco ISE installation ISO file to the local system.
Cisco Identity Services Engine Hardware Installation Guide, Release 2.0.1
34
Install Cisco ISE Software on the SNS 3515 and SNS 3595 Appliances
Install the ISE Server
