Configuring the Cisco WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide
35
6
Configuring WPA2-Enterprise Mixed
This security mode supports the transition from WPA-Enterprise to WPA2-
Enterprise. You can have client devices that use either WPA-Enterprise or WPA2-
Enterprise. The access point will automatically choose the encryption algorithm
used by each client device.
!
CAUTION
Use this mode only when a RADIUS server is connected to the access point.
To enable wireless WPA2-Enterprise Mixed security, follow these steps:
STEP 1
Click
Wireless
>
Security
.
STEP 2
From the Security Mode drop-down menu, select
WPA2-Enterprise Mixed
.
STEP 3
To enable wireless isolation within the SSID, click
Enabled
.
STEP 4
Provide the following information:
•
Primary/Backup RADIUS Server
—Enter the IP address of the RADIUS
server. The Backup Radius server is used only if the primary server is
unavailable.
•
Primary/Backup RADIUS Server Port
—Enter the port number used by
the RADIUS server. The default is 1812. The backup Radius server is used
only if the primary server is unavailable.
•
Primary/Backup Shared Secret
—Enter the Shared Secret key used by the
access point and RADIUS server. The backup Radius server is used only if
the primary server is unavailable.
•
WPA Algorithms
—WPA offers you two encryption methods, TKIP and AES
for data encryption. Select one of these algorithms. The default is
TKIP
.
•
Key Renewal Timeout
—Enter a key renewal timeout period, which
instructs the access point how often it should change the encryption keys.
The default is
3600
seconds.
STEP 5
Click
Save
.
