Configuring the Cisco WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide
32
6
•
Key Renewal
—Enter a key renewal timeout period, which instructs the
access point how often it should change the encryption keys. The default is
3600
seconds.
STEP 5
Click
Save
.
Configuring WPA2-Personal Mixed
This security mode supports the transition from WPA-Personal to WPA2-Personal.
You can have client devices that use either WPA-Personal or WPA2-Personal. The
access point will automatically choose the encryption algorithm used by each
client device. To enable wireless WPA2-Personal Mixed security, follow these
steps:
STEP 1
Click
Wireless
>
Security
.
STEP 2
From the Security Mode drop-down menu, select
WPA2-Personal Mixed
.
STEP 3
To enable wireless isolation within the SSID, click
Enabled
.
STEP 4
Provide the following information:
•
WPA Algorithms
—(Read-only) The WPA2-Personal Mixed security mode
automatically chooses TKIP or AES for data encryption.
•
Pre-Shared Key
—Enter a WPA Shared Key of 8–63 characters.
•
Key Renewal
—Enter a key renewal timeout period, which instructs the
access point how often it should change the encryption keys. The default is
3600
seconds.
STEP 5
Click
Save
.
