Configuring the Cisco WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide
30
6
Security
The
Wireless > Security
page displays the wireless security settings of the
access point. To configure the wireless security settings of the access point,
follow these steps:
STEP 1
Click
Wireless
>
Security
.
STEP 2
To configure wireless isolation between SSIDs:
a. From the
Select SSID
drop-down menu select an SSID.
b. To isolate wireless clients from each other, click
Enabled
. Otherwise, click
Disabled
.
STEP 3
To disable wireless security completely, from the Security Modes drop-down,
select
Disabled
. Disabled is the default setting.
STEP 4
To enable wireless security, from the Security Mode drop-down menu, select one
of the following security modes and provide the required information, as
described in the sections below.
•
WPA-Personal
•
WPA2-Personal
•
WPA2-Personal Mixed
•
WPA-Enterprise
•
WPA2-Enterprise
•
WPA2-Enterprise Mixed
•
Radius
•
WEP
STEP 5
To prevent wireless computers associated to the same SSID from seeing and
transferring files between each other, in the Wireless Isolation (within SSID) field,
click
Enabled.
This feature is very useful when setting up a wireless hotspot location. The default
is
Disabled
.
STEP 6
Click
Save
.
