6-40
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show diagnostic interface ethernet
show diagnostic interface ethernet
To display completed or ongoing diagnostic tests for Ethernet gateway ports, enter the show diagnostic
interface ethernet command in User Exec mode or Privileged Exec mode.
show diagnostic interface ethernet {port | all}
Syntax Description
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Ethernet read-only user.
Command Output:
Table 6-13
describes the fields in the show diagnostic interface ethernet command.
port
Ethernet port, in slot#/port# notation.
all
Specifies all Ethernet ports on the Server Switch.
Table 6-13
show diagnostic interface ethernet Command Field Descriptions
Field
Description
test
Test that ran or runs on the card.
port
Ethernet port number, in slot#/port# notation.
validation
Displays enabled or disabled to indicate validation status.
data-size
Size of the test data.
data-pattern
Pattern of the test data.
iterations
Number of iterations of the test.
action
Last action that an administrator performed on the test.
result
Result of the last action that an administrator performed on the test.
percentage-completed
Percentage of the test that has executed.
result-string
Result of the diagnostic test.
