5-8
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 5 IP Commands
ip
ip
To assign an IP address or backup address and subnet mask to an Ethernet port, enter the ip command
in Ethernet Interface Configuration submode. To clear this configuration, use the no form of this
command.
To assign an IP address to the Ethernet Management Interface port, enter the ip command in Ethernet
Management Interface submode. To clear this configuration, use the no form of this command.
To assign an IP address to the InfiniBand Management Interface port, enter the ip command in
InfiniBand Management Interface submode. To clear this configuration, use the no form of this
command.
To configure IP networking attributes on your Server Switch, enter the ip command in Global
Configuration mode. To clear this configuration, use the no form of this command.
Note
Layer 3 only; available to 4-port Ethernet gateways but not 6-port.
ip {address ip-address subnet-mask [priority address-priority]} no ip {address ip-address
subnet-mask} //configures Ethernet ports
ip address ip-address subnet-mask
//configures the Ethernet Management port
no ip
ip address ip-address subnet-mask
//configures the InfiniBand Management port
no ip
ip {domain-name name-string | name-server-one server | name-server-two server | route
dest-address dest-subnet-mask next-hop}
//configures a Server Switch
no ip {domain-name | name-server-one | name-server-two |
route dest-address subnet-mask next-hop}
Syntax Description
address
Assigns a primary IP address to a port.
ip-address
IP address to assign
subnet-mask
Subnet mask to assign.
priority
Assigns a priority to the backup address that determines the order in which
the backup address adopts the traffic of the primary address. Your Server
Switch does not currently support this feature.
address-priority
Priority to assign. The higher the integer value, the higher the priority.
domain-name
Assigns a DNS name to your Server Switch.
name-string
Domain name to assign.
name-server-one
Specifies a primary domain name server (DNS).
name-server-two
Specifies a secondary DNS.
server
Domain name server for your Server Switch to use.
route
Defines static routes to remote hosts or networks to forward IP packets.
dest-address
IP address of the host or network that you want to reach.
