6-81
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib pm config
show ib pm config
To view the performance monitoring configuration on an InfiniBand subnet, enter the show ib pm
config command in User Execute mode or Privileged Execute mode.
show ib pm config subnet-prefix prefix
Syntax Description
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Table 6-32
describes the fields in the show ib pm config command output.
Examples
The following example displays the output of the show ib pm config command:
SFS-120#
show ib pm config subnet-prefix fe:80:00:00:00:00:00:00
================================================================================
IB PM Configuration
================================================================================
subnet-prefix : fe:80:00:00:00:00:00:00
state : enable
polling-period : 10
start-delay : 60
subnet-prefix
Specifies the subnet prefix of the InfiniBand subnet for which you want to
view performance monitoring.
prefix
Subnet prefix of the InfiniBand subnet for which you want to view
performance monitoring
Table 6-32
show ib pm config Command Output Descriptions
Field
Description
subnet-prefix
Subnet prefix of the InfiniBand subnet with the performance monitoring
configuration you are viewing.
state
State of performance monitoring (enabled or disabled).
polling period
Interval at which the feature polls ports and connections (in seconds).
start-delay
Time that elapses before performance managing executes (in seconds).
