3-6
Cisco SFS 3504 Multifabric Server Switch Hardware Installation Guide
OL-14325-01
Chapter 3 Installing the Cisco SFS 3504 Server Switch
Mounting the Cisco SFS 3504 Server Switch on a Rack
Figure 3-2
Sliding the Cisco SFS 3504 Server Switch Between Rack Posts and Inserting Brackets
Step 3
Slide the Cisco SFS 3504 Server Switch between the rack posts (see
Figure 3-2
), until the rack ear
brackets on the front of the chassis make contact with the front rack posts.
Use four customer-supplied fasteners (two for each side) and an appropriate screwdriver (not included
in the accessory kit) to firmly secure the rack ear brackets to the front rack posts.
Note
The handle on the AC power-fan module and/or the blanking panel can be used as an aid to
support the power-fan module side of the chassis during rack-mounting installation.
Step 4
Slide the two adjustable brackets, from the back, between each of the guide rails that are attached on
either side of the Cisco SFS 3504 Server Switch at the data connection end (see
Figure 3-2
).
241649
INPUT
OK
FAN
OK
OUTPUT
FAIL
SFS3500
Series
CAUTION:
DISCONNE
CT POWER BE
FORE SER
VICING
!
ALL FASTENE
RS MUST
BE
FULLY ENGA
GED PRIOR
TO
OPERA
TION OF PO
WER SUPPL
Y
100-240V
8-4A
50/60Hz
INPUT
OK
FAN
OK
OUTPUT
FAIL
SFS3500
Series
CAUTION:
DISCONNE
CT POWER BEFORE S
ERVICING
!
ALL FAST
ENERS MUST
BE
FULLY EN
GAGED PRIOR
TO
OPERATION OF PO
WER SUP
PLY
100-240V
8-4A
50/60Hz
