D14869.11
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
93
Cisco TelePresence System Codec C20
API Reference Guide
FacilityService commands
xCommand FacilityService Dial
Dial out from the system to a facility service. A maximum of five facility services can be defined;
which one of these five to dial to is identified by the ServiceId (ref. xConfiguration Facility Service
[ServiceId] Type/Name/Number/CallType). The command returns information about the CallId and
ConferenceId.
ServiceId: The identifier of the facility service.
Requires user role:
USER
Parameters:
ServiceId(r): <1..5>
Example:
xCommand FacilityService Dial ServiceId: 1
OK
*r FacilityServiceDialResult (status=OK):
CallId: 2
ConferenceId: 1
** end
FarEndControl commands
xCommand FarEndControl Camera Move
Move the far end camera (the remote camera). NOTE: The far end camera moves in the specified
direction until the stop command (ref: xCommand FarEndControl Camera Stop) is issued
CallId: The CallID is returned when the xCommand Dial command is run. During the call you can run
the xStatus Call command to see the CallId.
Value: Select the action for how to move the camera.
Requires user role:
USER
Parameters:
CallId: <0..65534>
Value(r): <Left/Right/Up/Down/ZoomIn/ZoomOut>
Example:
xCommand FarEndControl Camera Move CallId:3 Value:left
*r FECCMoveResult (status=OK):
** end
xCommand FarEndControl Camera Stop
Stop the far end camera after the xCommand FarEndControl Camera Move has been issued.
CallId: The CallID is returned when the xCommand Dial command is run. During the call you can run
the xStatus Call command to see the CallId.
Requires user role:
USER
Parameters:
CallId: <0..65534>
Example:
xCommand FarEndControl Camera Stop CallId:3
*r FECCMoveResult (status=OK):
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand
