Cisco Quick Set C20 Reference Manual Download Page 5

Page: 5 / 195

D14869.11

Codec C20 API Reference Guide TC7.0, JANUARY 2014.

Cisco TelePresence System Codec C20

API Reference Guide

What’s new in this version

This section provides an overview of the new and

changed system settings and new features in the TC7.0

software version.

Software release notes

For a complete overview of new features and changes,

we recommend reading the Software Release Notes

(TC7). Go to:



http://www.cisco.com/c/en/us/support/collaboration-

endpoints/telepresence-quick-set-series/products-

release-notes-list.html

Software download

For software download go to:



http://www.cisco.com/cisco/software/navigator.html

New features and improvements

New GUI for Touch 8

A new visual design for the Touch user interface is

introduced.

IPv6 and dual stack support

IPv6 and dual stack operations are fully supported, also

when using ActiveControl and ICE.

Use the following settings if you want to enable dual

stack operation with IPv6 as the preferred protocol:

Network 1 IPStack: Dual

(enables IPv4 and IPv6 network address (default))

Conference 1 CallProtocolIPStack: Dual

(enables dual stack operation for the call protocols)

SIP PreferredIPMedia: IPv6

(selects which IP version to prefer for media if both

versions are supported on both ends)

SIP PreferredIPSignaling: IPv6

(selects which IP version to prefer for signaling if

both versions are supported on both ends)

Presentation will stop when the presentation source is

disconnected

If a presentation source is disconnected or goes into

standby (e.g. a PC), the presentation will automatically

be ended after 10 seconds. If the source is connected

or comes out of standby within 10 seconds, the

presentation will automatically be resumed.

When presenting an input source that is not connected,

an empty presentation will not be sent to the far end.

Tap the upper left corner

to activate/deactivate the

Do not disturb

feature, to

activate/deactivate the

Standby

feature, and to

access the

Settings

Tap the icon to

activate selfview,

choose a preset

camera position,

and pan/tilt/zoom

the camera.

Password protection of the Touch Administrator menu

You must sign in with the video system’s administrator

password to get access to the Administrator menu on

Touch 8.

Support for TMS phonebook when provisioned by CUCM

As from TMS release 14.4 and TC7.0, endpoints that are

provisioned by CUCM can use the TMS phone book.

Serviceability: Network status available for Touch 8

Network status for the Touch device is available from the

Touch interface. This informaton can be used to verify that

the device has an IP address and that it is receiving and

sending packets to the network. You can also detect if

packets are lost (dropped or in error). This can help to identify

network problems that may cause issues in calls.

Contents

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

Summary of Contents for Quick Set C20




































































































































































































Search results

Summary of Contents for Quick Set C20

Reviews:

Related manuals for Quick Set C20

Brands by name

Popular brands

Cisco Quick Set C20, Reference Manual

Search results

Summary of Contents for Quick Set C20

Reviews:

Related manuals for Quick Set C20

Brands by name

Popular brands