manualshive.com logo in svg

Cisco PXM Version 1.1, User Manual, Page: 39 / 110

Share
Download
Cisco PXM Version 1.1 User Manual Download Page 39

 

3-3

Cisco Carrier Sensitive Routing User Guide

 

Chapter3       Cisco Carrier Sensitive Routing Application Operations

Deactivating CSR

Deactivating CSR

To stop CSR, log in to the CSR GUI by performing the following steps:

Step 1

At the system prompt,  enter the following command:

/usr/local/csr/gui/csrgui &

The login dialog box in 

F i g u r e 3 - 1 ‘Login Dialog Box”

 appears.

Figure3-1

Login Dialog Box

Step 2

Enter the information on the Login screen as follows:

a.

Enter the user name. The range is 1 to 32 characters.

b.

Enter the password. The range is 1 to 32 characters.

c.

Enter the host name that is the location of the database. This can be a remote or local host. The range 
is 1 to 32 characters.

d.

Enter port number. This is the port on the system for the database connection. The range is 1 to 
32767.

e.

Enter DB Name. This is the name of the database to be connected to. The range is 1 to 32 characters.

f.

Click Login.

If login is successful, the CSR window in 

Figure3-2

 

“CSR Window”

 appears. Otherwise, a login 

failure message appears and the Login dialog box reappears. The user is limited to three login 
attempts, then the GUI shuts down. See 

Chapter4, “CSR GUI Functionalities”

.

Summary of Contents for PXM Version 1.1















































































































Reviews:

No comments