manualshive.com logo in svg

Cisco PXM Version 1.1, User Manual, Page: 56 / 110

Share
Download
Cisco PXM Version 1.1 User Manual Download Page 56

 

4-16

Cisco Carrier Sensitive Routing User Guide

Chapter4      CSR GUI Functionalities

Updating Active Datasets

Figure4-19 Dialog Box for an Existing Carrier in Active Dataset

Step 3

Change the information accordingly.

Step 4

Click Modify  to save the changes, or click

 

Cancel

 

to cancel the changes.

Deleting Carriers

Step 1

In the Active Dataset tab in the CSR window, if Carriers is not selected in the Selection box, click the 
down arrow in that box, then select Carrier from the pull-down menu.

Step 2

In the Carriers area, click a carrier. You can select more than one carrier by holding down the Ctrl key 
while clicking each carrier.

Step 3

Click

 

Delete. The following message appears (

Figure4-20 “Delete Carrier Message in Active Dataset ”

):

Figure4-20 Delete Carrier Message in Active Dataset

Step 4

Click Yes to delete the carrier, or click No  to stop deletion.

Summary of Contents for PXM Version 1.1















































































































Reviews:

No comments