4-21
Cisco Carrier Sensitive Routing User Guide
Chapter4 CSR GUI Functionalities
Updating Active Datasets
Step 4
Click Modify to save the changes, or click
Cancel to cancel the changes.
Deleting Contact Lists
Step 1
In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select
Contact Lists from the pull-down menu.
Step 2
In the Contact Lists area, click a contact list. You can select more than one list by holding down the Ctrl
key while clicking each contact list.
Step 3
Click
Delete
.
A Delete message appears.
Step 4
Click Yes to delete the contact list, or click No to stop the deletion.
Note
Alternatively, you can delete a contact list by clicking
Delete
when you are in the dialog box
for modifying the list.
Creating, Modifying, and Deleting Egress Route Attributes
This section describes the steps to create, modify, and delete Egress Route Attributes.
Creating Egress Route Attributes
Step 1
In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select
Egress Route Attributes from the pull-down menu.
Step 2
Click New. The following screen appears (
Figure4-25 “ Dialog Box for New Egress Route Attribute in
Active Dataset ”
):