manualshive.com logo in svg

Cisco PXM Version 1.1, User Manual, Page: 34 / 110

Share
Download
Cisco PXM Version 1.1 User Manual Download Page 34

 

2-16

Cisco Carrier Sensitive Routing User Guide

Chapter2      PostgreSQL Database Operations and Functionalities

Database Functionalities

Note

Tables IngressRouteAttributes_1 and IngressRouteAttributes _2 can inherit from the 
RouteAttributes table.

DaypartType

text

NO

Valid values:

•

absolute

•

weekly

•

daily

•

always

The CSR searches for the correct 
value in the following order:

•

absolute = specific date/time 
range. Start date, end date, 
start time, and end time must 
be entered.

•

weekly=a specific day of the 
week during a specific time. 
Start time, end time, and 
weekday must be entered.

•

daily=each day for a specific 
time. Start time and end time 
must be entered.

•

always=all the time.

WeekDay

integer

>= 0 and <= 6. 
As 0=Sunday, 
6=Saturday.

This is for the weekly setting.

StartTime

time

Valid format: 
hour(0-23):min 
(0-60):sec 
(0-60)

This is for the absolute, weekly, 
and daily settings.

EndTime

time

Valid format: 
hour(0-23):min 
(0-60):sec 
(0-60)

This is for absolute, weekly, and 
daily settings.

Cost

integer

>= 1

Cost associated with this 
attribute.

MaxUnits

integer

>= 0

Maximum units.

MaxPercentage

integer

>= 1 and 
<=100

Maximum percentage.

Table2-15 RouteAttributes Table (continued)

Name 

Type

Allow 
Null

Default Constraints

Comments

Summary of Contents for PXM Version 1.1















































































































Reviews:

No comments