manualshive.com logo in svg

Cisco PXM Version 1.1, User Manual, Page: 35 / 110

Share
Download
Cisco PXM Version 1.1 User Manual Download Page 35

 

2-17

Cisco Carrier Sensitive Routing User Guide

 

Chapter2       PostgreSQL Database Operations and Functionalities

Database Functionalities

Note

EgressRouteAttributes_1 and EgressRouteAttributes_2 can inherit from the 
EgressRouteAttributes and RouteAttriubtes tables.

Note

Tables QoS_1 and QoS_2 can inherit from this QoS table.

Table2-16 EgressRouteAttributes Table

Name 

Type

Allow 
Null

Default

Constraints

Comments

QoS

integer

>= 0 and <= 9

Quality of service.

ListKey

integer

Foreign key. Key of 
list associated with 
this egress route 
attribute.

Table2-17 QoS Table

Name 

Type

Allow 
Null

Default

Constraints

Comments

IngressCarrierKey

integer

NO

Foreign key. Key of 
the ingress carrier.

EgressCarrierKey

integer

NO

Foreign key. Key of 
the egress carrier

RouteKey

integer

NO

Foreign key. Key of 
the route associated 
with the QoS.

RelativeQoS

integer

NO

>= 1 and <= 9

Relative quality of 
service.

Table2-18 QoS Table

Name 

Type

Allow 
Null

Default

Constraints

Comments

RouteKey

integer

NO

Foreign key. Key of the 
route associated with this 
QoS.

AttributeKey

integer

NO

Foreign key. Key of the 
attribute associated with 
this QoS.

Summary of Contents for PXM Version 1.1















































































































Reviews:

No comments