468
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip eigrp topology
show ip eigrp topology
To display the Enhanced Interior Gateway Routing Protocol (EIGRP) topology table, use the
show ip
eigrp topology
command.
show ip eigrp
[
instance-tag
]
topology
[
ip-address
/
length
] [
active
|
all-links
|
detail-links
|
pending
|
summary
|
zero-successors
] [
vrf
{
vrf-name
|
all
|
default
|
management
}]
Syntax Description
Command Default
This command displays information for the default VRF if no VRF is specified.
Command Modes
Any command mode
Command History
Usage Guidelines
Use the
show ip eigrp topology
command to determine Diffusing Update Algorithm (DUAL) states and
to debug possible DUAL problems.
When you use the
show ip eigrp topology
command without any keywords or arguments, Cisco NX-OS
displays only routes that are feasible successors.
instance-tag
(Optional) Name of the EIGRP instance. The instance tag can be any
case-sensitive, alphanumeric string up to 20 characters.
ip-address/length
(Optional) IPv4 or IPv6 address in four-part, dotted-decimal notation
with a network mask indicated as a slash (/) and number. For
example, /8 indicates that the first 8 bits of the mask are 1s, and the
corresponding bits of the address are the network address.
active
(Optional) Displays only active entries in the EIGRP topology table.
all-links
(Optional) Displays all entries in the EIGRP topology table.
detail-links
(Optional) Displays detailed information for all entries in the EIGRP
topology table.
pending
(Optional) Displays all entries in the EIGRP topology table that are
waiting for an update from a neighbor or are waiting to reply to a
neighbor.
summary
(Optional) Displays a summary of the EIGRP topology table.
zero-successors
(Optional) Displays available routes in the EIGRP topology table.
vrf
vrf-name
(Optional) Specifies the name of the virtual routing and forwarding
(VRF) instance. The
vrf-name
argument can be specified as any
case-sensitive, alphanumeric string up to 32 characters.
all
(Optional) Specifies all VRF instances.
default
(Optional) Specifies the default VRF.
management
(Optional) Specifies the management VRF.
Release
Modification
5.0(3)A1(1)
This command was introduced.
