221
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
mac-list
mac-list
To filter based on a MAC address, use the
mac-list
command. To remove the MAC list entry, use the
no
form of this command.
mac-list
name
[
seq
number
] {
permit
|
deny
}
mac-address
[
mac-mask
]
no mac-list
name
[
seq
number
] {
permit
|
deny
}
mac-address
[
mac-mask
]
Syntax Description
Command Default
No match values are defined.
Command Modes
Global configuration mode
Command History
Usage Guidelines
You can match against the MAC list in a route map.
This command requires the LAN Enterprise Services license.
Examples
This example shows how to create the Red MAC list:
switch#
configure terminal
switch(config)#
mac-list Red seq 1 permit 0022.5579.a4c1 ffff.ffff.0000
switch(config)#
name
MAC list name. The name can be any case-sensitive, alphanumeric
string up to 32 characters.
seq
number
(Optional) Creates an entry in the MAC list. The
seq
range is from 1
to 4294967294.
permit
Allows the packet or route that matches a MAC address in the MAC
list.
deny
Blocks the packet or route that matches a MAC address in the MAC
list.
mac-address
MAC address to filter against.
mac-mask
(Optional) Portion of the MAC address to match against, in MAC
address format.
Release
Modification
5.0(3)A1(1)
This command was introduced.
