102
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
default-information originate (EIGRP)
default-information originate (EIGRP)
To generate a default route into the Enhanced Interior Gateway Routing Protocol (EIGRP), use the
default-information originate
command. To disable this feature, use the
no
form of this command.
default-information originate
[
always
] [
route-map
map-name
]
no default-information originate
Syntax Description
Command Default
Disabled
Command Modes
Address-family configuration mode
Router configuration mode
Router VRF configuration mode
Command History
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to originate a default route (0.0.0.0/0) to all routes that pass the Condition route
map:
switch#
configure terminal
switch(config)#
router eigrp 201
switch(config-router)#
address-family ipv4 unicast
switch(config-router-af)#
default-information originate route-map Condition
switch(config-router-af)#
Related Commands
always
(Optional) Generates the default route if the route is not in the EIGRP
routing information base.
route-map
map-name
(Optional) Generates the default route only if the route is permitted by the
route map. The map name is an alphanumeric string of up to 63 characters.
Release
Modification
5.0(3)A1(1)
This command was introduced.
Command
Description
address-family
Enters address-family configuration mode.
copy running-config
startup-config
Saves the configuration changes to the startup configuration file.
default-metric
Sets the metric for routes redistributed into EIGRP.
