231
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
match interface
match interface
To match an interface in a route map, use the
match interface
command. To remove the match, use the
no
form of this command.
match interface
{{
ethernet
slot
/
port
|
loopback
if_number
|
mgmt
mgmt-id
|
port-channel
number
}[, {
ethernet
slot
/
port
|
loopback
if_number
|
mgmt
mgmt-id
|
port-channel
number
}...]}
no interface
{{
ethernet
slot
/
port
|
loopback
if_number
|
mgmt
mgmt-id
|
port-channel
number
}[,
{
ethernet
slot
/
port
|
loopback
if_number
|
mgmt
mgmt-id
|
port-channel
number
}...]]}
Syntax Description
Command Default
None
Command Modes
Route-map configuration mode
Command History
Usage Guidelines
Route next-hop addresses that are reached by one of the interfaces result in a match for the route map.
A route map can have several parts. Any route that does not match at least one
match
clause that relates
to a
route-map
command is ignored; that is, the route is not advertised for outbound route maps and is
not accepted for inbound route maps. If you want to modify some particular data, you must configure a
second route-map section with an explicit match specified.
This command requires the LAN Enterprise Services license.
Examples
This example shows how to configure a list of interfaces:
switch#
configure terminal
switch(config)#
route-map test1
switch(config-route-map)#
match interface ethernet 2/1, ethernet 4/3
switch(config-route-map)#
ethernet
slot/port
Specifies the Ethernet interface and the slot number and port number. The slot
number is from 1 to 255, and the port number is from 1 to 128.
loopback
if_number
Specifies the loopback interface. The loopback interface number is from 0 to
1023.
port-channel
number
Specifies the EtherChannel interface and EtherChannel number. The range is
from 1 to 4096.
mgmt
mgmt-id
Specifies the management interface. The interface number is 0.
Release
Modification
5.0(3)A1(1)
This command was introduced.
