2-22
Cisco Media Gateway Controller Node Manager Installation Guide
OL-18332-04
Chapter 2 Installing Cisco MNM
Uninstalling Cisco MNM
•
All HSI objects, using the Map Viewer HSI-View
•
All MGC objects, using the Map Viewer MGC-Node-View
The objects discovered before the upgrade should appear it.
Step 20
Remove the dial plan components if they exist manually for each MGC node:
a.
Expand the MGC node
b.
Right click the dial plan component
c.
Choose Deployment > Delete Objects
d.
Click Finish in the prompt.
Note
During the upgrade process, you might see error messages caused by Cisco EMF trying to create
controllers that already exist. These messages can be safely ignored.
Backing Up Your Databases
If you are upgrading from Cisco MNM 2.x, the upgrade process retains your databases. However, it is
good practice to back up your databases before upgrading. For more information, see the Cisco Element
Management Framework Installation and Administration Guide at
http://www.cisco.com/en/US/docs/net_mgmt/element_manager_system/3.2_service_pack_7/installatio
n/guide/3_2p7adm.pdf
Uninstalling Cisco MNM
Cisco EMF must be running in order for you to uninstall Cisco MNM. Use the following procedure to
uninstall the Cisco MNM software:
Step 1
If Cisco MNM is running, click File > Quit to exit it. Do not stop Cisco EMF.
Step 2
Insert Cisco MNM CD in the CD-ROM drive.
Step 3
Change the working folder using the following command:
#
cd /cdrom/cscocmnm
Step 4
Enter either this command:
#
./cmnminstall -r
or this command:
#
./cmnminstall -remove
Text similar to the following is displayed:
----------------------------------------------------------------------
Cisco MGC-Node Manager Uninstallation
Thu Oct 30 10:53:35 AM
----------------------------------------------------------------------
