2-14
Cisco Media Gateway Controller Node Manager Installation Guide
OL-18332-04
Chapter 2 Installing Cisco MNM
Performing a New Installation of Cisco MNM
Step 9
Enter y and press Enter to continue.
Step 10
Enter the required information:
•
Database backed up—Press Enter if you had your database backed up.
•
CiscoView Server IP address—Enter the IP address of the CiscoView server installed in the
“Task
7: Install CiscoView 6.1.8 on a Solaris 10 Operating System” section on page 2-7
. If you are not
using CiscoView, press Enter.
•
Logfile directory location—Press Enter to accept the default location /var/tmp, or enter another
location and press Enter.
•
Logfile name—Press Enter to accept the default name CSCOcmnm.log, or enter another name and
press Enter.
Step 11
Enter y to proceed with the installation.
Note
If the disk space is not sufficient, delete your unwanted files.
When the installation is complete, text similar to the following is displayed:
Everything appears to be installed correctly.
Note
The installation might take 15–40 minutes, depending on your system. If the installation is not
successful, check the installation log, /var/tmp/installCSCOcmnm.log.
This completes the Cisco MNM installation procedure. Continue with the
“Verifying the Cisco MNM
Installation” section on page 2-14
.
Verifying the Cisco MNM Installation
Step 1
Before starting Cisco MNM, verify that the package is installed by using the following command:
#
pkginfo CSCOcmnm
Text similar to the following is displayed:
application CSCOcmnm Cisco MGC-Node Manager(CMNM)2.8.1
Step 2
Use the following command to verify that the Cisco MNM element managers have been installed:
#
<CEMF_ROOT>/bin/cmnmversion -verbose
Text similar to the following is displayed:
CSCOcmnm Tool Versions
Patch Build Build
Name Version Level Num Type
------------------------------------
CSCOcmnm 2.8.1(FCS) 00 102308 REL
CSCOcmcv 2.8.1
CSCOcmhp 2.8.1 00
CSCOcemfm 3.2 Patch: 170007-06
Patch: 190701-05
