manualshive.com logo in svg

Cisco MCS 7800 Series, Administrator'S Manual

The Cisco MCS 7800 Series is a reliable and high-performance network server designed for various business applications. To help you get started quickly, we provide a comprehensive Quick Start Manual that you can easily download for free from our website. Explore the endless possibilities with this powerful product.

Share
Download
background image

Possible Explanation and Action

Description

Message

From Cisco Unified Operating System
Administration, check that the following files are
located within subdirectories in the TFTP File
Management:

•

Located in subdirectory with same name as
network locale:

◦

tones.xml

•

Located in subdirectory with same name as
user locale:

◦

glyphs.xml

◦

dictionary.xml

◦

kate.xml

One or more localization files could not
be found in the TFTP Path directory or
were not valid. The locale was not
changed.

Error Updating Locale

The configuration file for a phone is created when
the phone is added to the Cisco Unified
Communications Manager database. If the phone
does not exist in the Cisco Unified
Communications Manager database, the TFTP
server generates a CFG File Not Found response.

•

Phone is not registered with Cisco Unified
Communications Manager.

You must manually add the phone to Cisco
Unified Communications Manager if you
are not allowing phones to autoregister.

•

If you are using DHCP, verify that the
DHCP server is pointing to the correct TFTP
server.

•

If you are using static IP addresses, check
configuration of the TFTP server.

The name-based and default
configuration file was not found on the
TFTP Server.

File not found <Cfg File>

No impact; the phone can still register to Cisco
Unified Communications Manager.

This message displays on the phone
when the Cisco Unified Communications
Manager cluster is not in secure mode.

File Not Found <CTLFile.tlv>

The phone remains idle until it is power cycled
or until you reset the DHCP address.

The phone is configured to release the
IP address.

IP Address Released

   Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager

176

Cisco IP Phone Status

Summary of Contents for MCS 7800 Series











































































































































































































































Reviews:

No comments

Related manuals for MCS 7800 Series

Saito E200 Instructions For Use Manual preview
E200
Brand: Saito Pages: 90
Panasonic KX-NS300 Cabling Configuration preview
KX-NS300
Brand: Panasonic Pages: 5
Panasonic KX-HTS Series Setup Reference Manual preview
KX-HTS Series
Brand: Panasonic Pages: 14
Panasonic HDVC-MPCS Specification preview
HDVC-MPCS
Brand: Panasonic Pages: 2
Panasonic VoiceSonic KX-NT700 Quick Reference Manual preview
VoiceSonic KX-NT700
Brand: Panasonic Pages: 8
HandyTrac Key Control Easy Manual Installation And Operation preview
Key Control
Brand: HandyTrac Pages: 14
WAREMA Wisotronic Operating Instructions Manual preview
Wisotronic
Brand: WAREMA Pages: 112
KanDao Meeting Ultra Manual preview
Meeting Ultra
Brand: KanDao Pages: 265
Modine Manufacturing Airedale Sentinel Quick Start Manual preview
Airedale Sentinel
Brand: Modine Manufacturing Pages: 2
ATEN VK1100 User Manual preview
VK1100
Brand: ATEN Pages: 176
Solda p2chanter Manual preview
p2chanter
Brand: Solda Pages: 22
SEW-Eurodrive IPOS plus Manual preview
IPOS plus
Brand: SEW-Eurodrive Pages: 384
Danley SH-SM Owner'S Manual preview
SH-SM
Brand: Danley Pages: 8
Vantage Hearth Q-ETS3 Installation preview
Q-ETS3
Brand: Vantage Hearth Pages: 2
Aventura VPO-411FC User Manual preview
VPO-411FC
Brand: Aventura Pages: 55
Multilaser Royal P3159 User Manual preview
Royal P3159
Brand: Multilaser Pages: 25
Blaupunkt MS16BT Series Owner'S Manual preview
MS16BT Series
Brand: Blaupunkt Pages: 103
Pioneer aKP-151 ? Service Manual preview
aKP-151 ?
Brand: Pioneer Pages: 8

Brands by name

Popular brands

Load more brands