manualshive.com logo in svg

Cisco MCS 7800 Series, Administrator'S Manual

The Cisco MCS 7800 Series is a reliable and high-performance network server designed for various business applications. To help you get started quickly, we provide a comprehensive Quick Start Manual that you can easily download for free from our website. Explore the endless possibilities with this powerful product.

Share
Download
background image

Possible Explanation and Action

Description

Message

Phone has CTL and ITL files installed and it
failed to update the new CTL and ITL files.

Possible reasons for failure:

•

Network failure occurred.

•

TFTP server was down.

•

The new security token that was used to sign
CTL file and the TFTP certificate that was
used to sign ITL file are introduced, but are
not available in the current CTL and ITL
files in the phone.

•

Internal phone failure occurred.

Possible solutions:

•

Check network connectivity.

•

Check whether the TFTP server is active
and functioning normally.

•

If the Transactional Vsam Services (TVS)
server is supported on Cisco Unified
Communications Manager, check whether
the TVS server is active and functioning
normally.

•

Verify whether the security token and the
TFTP server are valid.

Manually delete the CTL and ITL files if all the
preceding solutions fail; reset the phone.

Update of the CTL and ITL files failed.

Trust List Update Failed

None. This message is informational only.

The CTL file, the ITL file, or both files
are updated.

Trust List Updated

Make sure that the phone load file has the correct
name.

The name of the phone load file is
incorrect.

Version Error

None. This message indicates the name of the
configuration file for the phone.

Name of the configuration file.

XmlDefault.cnf.xml, or .cnf.xml
corresponding to the phone device
name

Related Topics

Cisco Unified Communications Manager Documentation, on page xiii

   Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager

180

Cisco IP Phone Status

Summary of Contents for MCS 7800 Series











































































































































































































































Reviews:

No comments

Related manuals for MCS 7800 Series

Panasonic DVD-CV36 Quick Manual preview
DVD-CV36
Brand: Panasonic Pages: 2
Samsung MX-T70 Manual preview
MX-T70
Brand: Samsung Pages: 60
Samsung MX-F630B Quick Manual preview
MX-F630B
Brand: Samsung Pages: 2
Samsung MM-ZB9 Manual De Instrucciones preview
MM-ZB9
Brand: Samsung Pages: 24
Samsung MM-B3 Manual Del Instrucción preview
MM-B3
Brand: Samsung Pages: 22
Samsung MAX-VJ650 Service Manual preview
MAX-VJ650
Brand: Samsung Pages: 23
Accutrol VTS Installation & Operation Manual preview
VTS
Brand: Accutrol Pages: 25
VCON Escort Installation And Setup Manual preview
Escort
Brand: VCON Pages: 66
Systemline Multi-room system Installation Manual preview
Multi-room system
Brand: Systemline Pages: 22
heat-timer Mini-MOD Installation And Operation Instruction Manual preview
Mini-MOD
Brand: heat-timer Pages: 36
Graco 25A693 Instructions Manual preview
25A693
Brand: Graco Pages: 166
Cyrus CD7 User Instructions preview
CD7
Brand: Cyrus Pages: 6
Velux KUX 100 Instructions Manual preview
KUX 100
Brand: Velux Pages: 11
RADVision Scopia XT5000 Series User Manual preview
Scopia XT5000 Series
Brand: RADVision Pages: 55
KBSOUND Select kit Installation Manual preview
Select kit
Brand: KBSOUND Pages: 2
Greenheck 474754 Installation, Operation And Maintenance Manual preview
474754
Brand: Greenheck Pages: 16
Close Talk Close Talk Conference System Installation Instructions preview
Close Talk Conference System
Brand: Close Talk Pages: 2
Kaye ValProbe RT User Manual preview
ValProbe RT
Brand: Kaye Pages: 168

Brands by name

Popular brands

Load more brands