Networking
Configuring the VLAN
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
121
4
NOTE
The Start and End IP addresses must be in the same subnet with the
VLAN IP address.
•
Lease Time:
Enter the maximum connection time that a dynamic IP address
is “leased” to a network user. When the time elapses, the user will be
automatically renewed the dynamic IP address.
•
DNS 1:
Enter the IP address of the primary DNS server.
•
DNS 2:
Optionally, enter the IP address of the secondary DNS server.
•
WINS 1:
Enter the IP address for the primary WINS server.
•
WINS 2:
Optionally, enter the IP address of the secondary WINS server.
•
Domain Name:
Optionally, enter the domain name for the VLAN
•
Optional 66:
Only supports the IP address or host name of a single TFTP
server. Enter the
IP address of the single TFTP server for the VLAN.
•
Optional 67:
Enter the boot file name or configuration file name on the
specified TFTP server.
•
Optional 150:
Supports a list of TFTP servers (2 TFTP servers). Enter the IP
addresses of TFTP servers. Separate multiple entries with commas (,).
NOTE
Enterprises with small branch offices that implement a Cisco IP
Telephony Voice over IP solution typically implement Cisco
CallManager at a central office to control Cisco IP Phones at small
branch offices. This implementation allows centralized call
processing, reduces the equipment required, and eliminates the
administration of additional Cisco CallManager and other servers at
branch offices. Cisco IP Phones download their configuration from a
TFTP server. When a Cisco IP Phone starts, if it does not have both the
IP address and TFTP server IP address pre-configured, it sends a
request with option 150 or 66 to the DHCP server to obtain this
information.
STEP 6
In the
IPv6 Setting
tab, specify the IPv6 addressing for the VLAN if you enable the
IIPv4/Pv6 mode.
•
IPv6 Address:
Enter the IPv6 address based on your network requirements.
