9. Electrical power requirements
The following table describes:
• The electrical power requirements for each Cisco hardware
device type.
• Which Cisco hardware devices are capable of receiving power
through an IEEE 802.3 Ethernet port (whether from a power-
supplying device like a compatible network switch, or from a power-
over-Ethernet (PoE) injector), or through a DC IN power supply
port, or both.
• The specific voltage-variation tolerances of each Cisco radio
transceiver unit type.
Table 9. Individual power requirements (FM1000 Gateway and
FM10000 Gateway)
Required input
power
FM1000
Gateway
FM10000
Gateway
DC IN
12 Vdc (from mains
AC power adapter
producing a
minimum of 60W
(12V/5A)).
X
First-generation FM10000
Gateway: unit may be equipped
with single 250W non-
redundant AC power supply unit
(input power: 100 Vac to 240
Vac at 50 Hz to 60 Hz).
X
Table 10. Individual power requirements (FM Ponte kit to FM4200
Mobi)
FM Ponte
kit
(model
FM1200V-
HW)
FM1200
Volo
(model
FM1200V-
HW)
FM1300
Otto
FM3200
Base
(model
FM3200)
FM3200
Endo
(model
FM3200)
FM4200
Mobi
(model
FM4200)
PoE
24V
passive
PoE
X
X
48V
passive
PoE
X
X
X
Electrical power requirements
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 159 of 176
