11
Figure 5
Connecting the Interface Cable
Step 1
Plug one end of the interface cable into the jack labeled
AUX on the Cisco IP Phone.
Step 2
Plug the other end of the interface cable into the AUX
jack with the “in” icon underneath on the
Expansion Module 7914.
Note
If you are installing a
second
Expansion Module 7914, continue with Steps
3
and
4
. Otherwise go to the “Connect the
Power Supply” section on page 12.
1
Interface cable connection to the AUX jack on the
Cisco IP Phone
2
Interface cable connection to the AUX jack labeled with
the “in” icon on Expansion Module 1
3
Second interface cable connection to the AUX jack labeled
with the “out” icon on Expansion Module 1
4
Second interface cable connection to the AUX jack labeled
with the “in” icon on Expansion Module 2
1
2
3
4
140166
140966
